Whammy Bar Question

MrShipments
Posts: 6
Joined: Tue Jul 03, 2018 1:35 am

Whammy Bar Question

Postby MrShipments » Thu Aug 09, 2018 7:03 pm

I'm very new to Heavier7, sorry for the noob question, BUT

I use FL Studio... I cannot seem to find a way to automate the whammy bar bend. What am I missing here?

Thanks.
User avatar
admin
Site Admin
Posts: 246
Joined: Thu Jul 21, 2016 8:59 am

Re: Whammy Bar Question

Postby admin » Fri Aug 10, 2018 9:35 am

MrShipments wrote:I'm very new to Heavier7, sorry for the noob question, BUT

I use FL Studio... I cannot seem to find a way to automate the whammy bar bend. What am I missing here?

Thanks.


Hi! It's all good. Thanks for purchasing!
Whammy bar is controlled by pitch bend and cannot be automated.
Hope it helps. Let us know if you have further questions.
MrShipments
Posts: 6
Joined: Tue Jul 03, 2018 1:35 am

Re: Whammy Bar Question

Postby MrShipments » Fri Aug 10, 2018 5:05 pm

Okay, thanks for the info. So I understand that it is controlled by the pitch bend, but are you saying there is no way to automate the pitch-bend with a generator knob?

For example: I see tons of other pre-loaded generators in FLStudio for Heavier7.
I just can't seem to find anything for the pitch-bend.
Attachments
Inkedimage8231_LI2.jpg
Inkedimage8231_LI2.jpg (39.14 KiB) Viewed 6521 times
User avatar
DarkFlameSquirrel
Posts: 22
Joined: Mon Jul 17, 2017 7:51 pm

Re: Whammy Bar Question

Postby DarkFlameSquirrel » Sun Aug 12, 2018 12:34 am

Actually... it's just the channel pitch you'd need to automate. Right click it and select "Create automation clip."

Image

As the automation takes place during playback, you'll notice the whammy on the H7S UI moves accordingly.

Like this: https://youtu.be/zQfWjEMln2o
Reaper | VSTi Metal Producer | Sing Synth user

YouTube | Soundcloud | Twitter
MrShipments
Posts: 6
Joined: Tue Jul 03, 2018 1:35 am

Re: Whammy Bar Question

Postby MrShipments » Sun Aug 12, 2018 2:34 am

DarkFlameSquirrel wrote:Actually... it's just the channel pitch you'd need to automate. Right click it and select "Create automation clip."

Image

As the automation takes place during playback, you'll notice the whammy on the H7S UI moves accordingly.

Like this: https://youtu.be/zQfWjEMln2o



Okay, you rock. Thank you very much.

Return to “Questions”